Push-button ignition switch positions
LOCK (Normal parking position)
The ignition switch can only be locked in this position.
The ignition switch will be unlocked when it is pushed to the ACC position while carrying the Intelligent Key or with the Intelligent Key inserted in the port.
ACC (Accessories)
This position activates electrical accessories such as the radio, when the engine is not running.
ON (Normal operating position)
This position turns on the ignition system and electrical accessories.
OFF
The engine can be turned off in this position.
The ignition lock is designed so that the ignition switch cannot be switched to the LOCK position until the selector lever is moved to the P (Park) position.
CAUTION
Do not leave the vehicle with the pushbutton ignition switch in ACC or ON positions when the engine is not running for an extended period. This can discharge the battery.
See also:
Fog light switch
To turn the fog lights on, turn the headlight
switch to the position, then turn
the
switch to the position. To turn them
off, turn the switch to the OFF position.
The headlights must be o ...
Securing the load
There are tie down hooks located in the
cargo area as shown. The tie down hooks
can be used to secure cargo with ropes or
other types of straps.
Do not apply a total load of more than 22
lb ...
Headlights
Replacing
Fog may temporarily form inside the lens of
the exterior lights in the rain or in a car
wash. A temperature difference between
the inside and the outside of the lens
causes the fog. ...