Front power seat adjustment

Front power seat adjustment  - Seats - SafetySeats, seat belts and supplemental restraint system - Infiniti JX Owners Manual - Infiniti JX

Operating tips

Operating tips

● The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch.
● Do not operate the power seat switch for a long period of time when the engine is off.

This will discharge the battery.

See Automatic drive positioner in Pre-driving checks and adjustments for automatic drive positioner operation.

Forward and backward

Moving the switch forward or backward will slide the seat forward or backward to the desired position.

Reclining

Move the recline switch backward until the desired angle is obtained. To bring the seatback forward again, move the switch forward and move your body forward. The seatback will move forward.

The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. See Precautions on seat belt usage later in this section. Also, the seatback can be reclined to allow occupants to rest when the vehicle is stopped and the shift selector is in P (Park).

Seat lifter

Lumbar support (drivers seat)

Lumbar support (drivers seat)

Manual (if so equipped)
Manual (if so equipped)

The lumbar support feature provides lower back support to the driver. Move the lever up or down (manual) or move the switch forward or backward (power) to adjust the seat lumbar area.

Power (if so equipped)
Power (if so equipped)

    See also:

    Automatic drive positioner (if so equipped)
    The automatic drive positioner system has three features: Entry/exit function (Automatic Transmission Sedan models) Seat synchronization function Memory storage ...

    Roadside assistance program
    In the event of a roadside emergency, Roadside Assistance Service is available to you. Please refer to your Warranty Information Booklet (U.S.) or Warranty & Roadside Assistance Informatio ...

    Clearing the programmed information
    Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20 seconds). ...