How to use the STATUS button

The STATUS button is used to display system information. Three different split screens of information are available. Press the STATUS button multiple times to cycle through these screens as follows:
Audio with Turn Information for Navigation → Audio with Fuel Economy Information → Audio with Climate Control Information → Audio with Turn Information for Navigation.
See also:
Trunk light
The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light will turn off.
The light will also turn off after 15 minutes when the light remains illuminated after the i ...
Canceling a remote start
To cancel a remote start, perform one of the following:
● Aim the Intelligent Key at the vehicle and press and hold until the parking
lights turn off.
● Turn on the hazard warning ...
Jacking up vehicle and removing thedamaged tire
WARNING
● Never get under the vehicle while it is supported only by the jack. If it is necessary to work under the vehicle, support it with safety stands.
● Use only the jack provide ...
