Using the system

Initialization
When the ignition switch is placed in the ON position, INFINITI Voice Recognition is initialized, which takes a few seconds. When completed, the system is ready to accept voice commands. If the
switch is pressed before the
initialization completes, voice commands will not be accepted.
Please wait until the INFINITI Voice Recognition initialization is completed.
See also:
Replacing
Replace the wiper blades if they are worn.
1. Lift the wiper arm away from the windshield.
2 Push the release tab, then move the wiper blade down the wiper arm to remove.
3 Remove the wiper ...
Installing front license plate
Use the following steps to mount the front license plate:
Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag:
Only use the recommended mounting ...
IC Regulatory information
• Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired op ...
