See also:

Procedure for storing the outsidemirror positions for best visibility whenbacking up
An outside mirror position for backing up can be stored for each memory switch (1 and 2): 1. Set the parking brake. 2. Place the ignition in the ON position. (Do not start the engine.) 3. Push ...

Coupe (except for INFINITI Performance Line, Aerodynamic Package models)
1. Park the vehicle on flat, level ground. 2. Locate the center position indicator A on the lower part of the grille. Measure straight down from the edge where the bumper and grille meet to the ali ...

Rapid air pressure loss
Rapid air pressure loss or a “blow-out” can occur if the tire is punctured or is damaged due to hitting a curb or pothole. Rapid air pressure loss can also be caused by driving on under-inflated tires ...