Seat belt extenders
If, because of body size or driving position, it is not possible to properly fit the lapshoulder belt and fasten it, an extender that is compatible with the installed seat belts is available that can be purchased. The extender adds approximately 8 in (200 mm) of length and may be used for either the driver or front passenger seating position. See an INFINITI retailer for assistance with purchasing an extender if an extender is required.
WARNING
► Only INFINITI seat belt extenders, made
by the same company which made the
original equipment seat belts, should be
used with the INFINITI seat belts.
► Adults and children who can use the
standard seat belt should not use an
extender. Such unnecessary use could
result in serious personal injury in the
event of an accident.
► Never use seat belt extenders to install
child restraints. If the child restraint is
not secured properly, the child could be
seriously injured in a collision or a
sudden stop.
See also:
Maintenance precautions
When performing any inspection or maintenance
work on your vehicle, always take
care to prevent serious accidental injury to
yourself or damage to the vehicle. The
following are general precau ...
Top tether anchor point locations
Anchor points are located on the rear parcel shelf.
The child restraint top tether strap must be used when installing the child restraint with the LATCH lower anchor attachments or seat belts. See “I ...
Rear window and outside mirror defroster switch
Rear window and outside mirror defroster switch
To defog/defrost the rear window glass and outside mirrors (if so equipped), start the engine and push the switch
1 on. The indicator light 2 will ...