SNOW mode switch

SNOW mode switch - Instruments and controls - Infiniti QX Owners Manual - Infiniti QX

For driving or starting the vehicle on snowy

For driving or starting the vehicle on snowy roads or slippery areas, push on the SNOW mode switch. The SNOW mode indicator light will illuminate. When the SNOW mode is activated, engine output is controlled to avoid wheel spin. Push off the SNOW mode for normal driving.

    See also:

    Lift gate
    WARNING ► Always be sure the lift gate has been closed securely to prevent it from opening while driving. ► Do not drive with the lift gate open. This could allow dangerous exha ...

    The BSW and BSI systems
    The Blind Spot Warning (BSW) and Blind Spot Intervention (BSI) systems can help alert the driver of other vehicles in adjacent lanes when changing lanes. The BSW system uses radar sensors 2 insta ...

    Normal operation
    The ABS operates at speeds above 3 to 6 MPH (5 to 10 km/h). When the ABS senses that one or more wheels are close to locking up, the actuator rapidly applies and releases hydraulic pressure. This act ...