Tow mode switch

Tow mode switch  - Instruments and controls - Infiniti QX Owners Manual - Infiniti QX

TOW MODE should be used when pulling a

TOW MODE should be used when pulling a heavy trailer or hauling a heavy load. Driving the vehicle in TOW MODE with no trailer/load or light trailer/light load will not cause any damage. However, fuel economy may be reduced, and the transmission/ engine driving characteristics may feel unusual. Push the TOW MODE switch to activate TOW MODE. The indicator light on the TOW MODE switch illuminates when TOW MODE is selected. Push the TOW MODE switch again to turn TOW MODE OFF. TOW MODE is automatically canceled when the ignition switch is placed in the OFF position.

    See also:

    Lane Departure Warning (LDW)/Prevention (LDP) system (if so equipped)
    The Lane Departure Warning (LDW) system/ Lane Departure Prevention (LDP) system will operate when the vehicle is driven at speeds of approximately 45 MPH (70 km/h) and above, and when it is tr ...

    Control buttons
    Control buttons 1. PHONE SEND button Push the button to initiate a VR session or answer an incoming call. You can also use the button to skip through system feedback and to enter commands during ...

    To protect your vehicle from corrosion
    ► Wash and wax your vehicle often to keep the vehicle clean. ► Always check for minor damage to the paint and repair it as soon as possible. ► Keep drain holes at the bottom ...