Remote keyless entry system

Remote keyless entry system  - Pre-driving checks and adjustments - Infiniti QX Owners Manual - Infiniti QX

The Intelligent Key transmits radio waves WARNING
The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that radio waves may affect aircraft navigation and communication systems. Do not operate the Intelligent Key while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored for a flight.

It is possible to lock/unlock all doors, fuelfiller door, activate the panic alarm and open the windows by pushing the buttons on the Intelligent Key from outside the vehicle. Before locking the doors, make sure the Intelligent Key is not left in the vehicle. The LOCK/UNLOCK button on the Intelligent Key can operate at a distance of approximately 33 ft (10 m) from the vehicle. (The effective distance depends upon the conditions around the vehicle.). As many as 4 Intelligent Keys can be used with one vehicle. For information concerning the purchase and use of additional Intelligent Keys, contact an INFINITI retailer. The lock and unlock buttons on the Intelligent Key will not operate when:
► the distance between the Intelligent Key and the vehicle is over 33 ft (10 m).
► the Intelligent Key battery runs down. After locking with the remote keyless entry function, pull the door handle to make sure the doors are securely locked. The LOCK/UNLOCK operating range varies depending on the environment. To securely operate the lock and unlock buttons, approach the vehicle to about 3 ft (1 m) from the door.

How to use remote keyless entry system

How to use remote keyless entry system

When you lock or unlock the doors or the lift gate, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see Setting hazard indicator and horn mode later in this section.

Locking doors and fuel-filler door

1. Move the selector lever to the P (Park) position, push the ignition switch to the OFF position and make sure you carry the Intelligent Key with you. 2. Close all the doors and the lift gate. 3. Push the LOCK Intelligent Key.button 1 on the Intelligent Key. 4. All the doors, the lift gate and fuel-filler door will lock. 5. The hazard indicator flashes twice and the horn chirps once. : Doors will lock with the Intelligent Key while the ignition switch is in the ACC or ON position. Unlocking doors and fuel-filler door 1. Push the UNLOCK Intelligent Key once.button2 on the Intelligent Key once. 2. The hazard indicator flashes once. The drivers door and fuel-filler door will unlock. The puddle light and the passenger cabin illumination will illuminate and stay on for a short period of time. 3. Push the UNLOCKIntelligent Key again within 60 seconds. button on the Intelligent Key again within 60 seconds. 4. The hazard indicator flashes once again. All the doors will unlock. All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the UNLOCK button on the Intelligent Key while the doors are locked. If during this 1- minute time period, the UNLOCK button on the Intelligent Key is pushed, all doors will be locked automatically after another 1 minute.

► Opening any door
► Pushing the ignition switch

Opening windows

To open the windows, push the door UNLOCK for about 3 seconds after the door isbutton on the Intelligent Key for about 3 seconds after the door is unlocked. To stop opening, release the UNLOCKbutton. button. Window cannot be closed using the Intelligent Key. The door windows can be opened or closed by turning the mechanical key in a door lock. (See Doors earlier in this section.)

Opening/closing lift gate

1. Push the power lift gate button 3 for more than 1 second. 3 for more than 1 second. 2. The lift gate will automatically open. The hazard indicator flashes 4 times and the outside chime sounds for approximately 3 seconds. To close the lift gate, push the power lift gate button second.3 for more than 1 second. The lift gate will automatically close. If the button lift gate is being opened or closed, the lift3 is pushed while the lift gate is being opened or closed, the lift gate will reverse. The power lift gate button be operated when the ignition switch is in3 cannot be operated when the ignition switch is in the ON position. Using panic alarm If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows: 1. Push the PANIC Intelligent Key for more than 1 second. button 4 on the Intelligent Key for more than 1 second. 2. The theft warning alarm and headlights will stay on for 25 seconds. 3. The panic alarm stops when:
► It has run for 25 seconds, or
► Any of the buttons on the Intelligent Key are pushed. (Note: Panic button or power lift gate button should be pushed for more than 1 second.)

Setting hazard indicator and horn mode

This vehicle is set in hazard indicator and horn mode when you first receive the vehicle. In hazard indicator and horn mode, when the LOCK hazard indicator flashes twice and the hornbutton 1 is pushed, the hazard indicator flashes twice and the horn chirps once. When the UNLOCK 2 is pushed, the hazard indicator flashes button 2 is pushed, the hazard indicator flashes once. If horns are not necessary, the system can be switched to the hazard indicator mode. In hazard indicator mode, when the LOCKis pushed, the hazard indicatorbutton is pushed, the hazard indicator flashes twice. When the UNLOCK is pushed, neither the hazardbutton is pushed, neither the hazard indicator nor the horn operates.

Hazard indicator and horn mode:

Hazard indicator mode:

Hazard indicator mode:

Switching procedure:

Switching procedure:

Push the LOCK 21 and UNLOCK buttons on the Intelligent Key simultaneously2 buttons on the Intelligent Key simultaneously for more than 2 seconds to switch the mode from one to the other. When pushing the buttons to set the hazard indicator mode, the hazard indicator flashes 3 times. When pushing the buttons to set the hazard indicator and horn mode, the hazard indicator flashes once and the horn chirps once.

Hood

    See also:

    How to use the INFO button
    Press the INFO button; the display screen shows vehicle and navigation information for your convenience. The information shown on the screen should be a guide to determine the condition of the ve ...

    Rocking a stuck vehicle
    If your vehicle is stuck in sand, snow, mud, etc., use the following procedure: 1. Turn off the Vehicle Dynamic Control (VDC) system. 2. Make sure the area in front and behind the vehicle is clear of ...

    ESP with Dynamic Cornering Enhancement
    The Infiniti M Line benefits from Infiniti's latest electronic stability program which optimizes control of braking and engine torque on individual wheels to achieve smoother and more stable corne ...