How to switch the display
The Around View Monitor display consists of the left and the right screens. You can see a combination of different views on the screens as illustrated above.
Starting with the selector lever operation
► When the selector lever is shifted into
the R (Reverse) position 1 while
another screenA is displayed, Around
View Monitor operates and the rearview
and bird-eye view B are displayed.
The Around View Monitor screen
switches to the previous screen when
the selector is shifted out of the R
(Reverse) position 2 .
► The view on the screen on the passenger’s
side switches to the front-side
view C when the CAMERA button is
pushed 3 . When the CAMERA button
is pushed again5 , the rear-wide view
D is displayed. When the CAMERA
button is pushed again7 , the view on
the screen on the passenger’s side
switches to the bird-eye view B .
The passenger’s side screen returns to
another by operating the same procedures
again.
When selecting the “Wide”, “Side” or
“Top” key on the screen using the
INFINITI controller and pushing the
ENTER button, the view on the screen
will change to the one previously
selected 4 , 6 , 8 .
► Once you have changed the view on the
screen on the passenger’s side, the
view on the driver’s side will change to
the front view by shifting the selector
lever out of the R (Reverse) position12 ,
14 .
When the selector lever is moved to any
other position than the R (Reverse)
position while the rear-wide view D
is displayed, another view that is set to
a higher priority will be displayed 16 .
Starting with the CAMERA button operation
► When the CAMERA button is pushed 9
while another screen A is displayed,
Around View Monitor operates and the
front view and bird-eye view E are
displayed.
► The view on the screen on the passenger’s
side switches to the front-side
view F when the CAMERA button is
pushed 10 . When the CAMERA button
is pushed again 17 , the screen A is
displayed.
► When selecting the “Side” or “Top” key
on the screen using the INFINITI controller
and pushing the ENTER button,
the view on the screen will change to
the one previously selected 11 .
► The left screen switches to the rearview
B , C when the selector lever is
shifted into the R (Reverse) position 13 , 15 and returns to the front view
E , F when the selector lever is
shifted out of the R (Reverse) position
12 , 14 .
► Push another button on the control
panel to quit the Around View Monitor.
See also:
Automatic operation
This mode may be used all year round as the system automatically works to keep a constant temperature. Air flow distribution and fan speed are also controlled automatically.
1. Press the AUTObutton ...
Vehicle Dynamic Control (VDC) system
The Vehicle Dynamic Control (VDC) system
uses various sensors to monitor driver
inputs and vehicle motion. Under certain
driving conditions, the VDC system helps
to perform the following funct ...
Rocking a stuck vehicle
If your vehicle is stuck in sand, snow, mud, etc., use the following procedure: 1. Turn off the Vehicle Dynamic Control (VDC) system.
2. Make sure the area in front and behind the vehicle is clear of ...