SNOW mode

SNOW mode  - Starting and driving - Infiniti QX Owners Manual - Infiniti QX

For driving or starting the vehicle on snowy

For driving or starting the vehicle on snowy roads or slippery areas, turn the SNOW mode on. To turn the SNOW mode on, push the SNOW mode switch. The SNOW mode indicator light on the meter panel will illuminate. When the SNOW mode is activated, engine output is controlled to avoid wheel spin. To turn the SNOW mode off, push the switch and the indicator on the meter panel will turn off. Turn the SNOW mode off for normal driving and fuel economy.

    See also:

    Clearing the programmed information
    Individual buttons cannot be cleared. However, to clear all programming: Press and hold the two outer HomeLink buttons until the indicator light begins to flash in approximately 10 seconds. Release ...

    Linking Intelligent Key to a stored memory position
    The Intelligent Key can be linked to a stored memory position with the following procedure. 1. Follow the steps for storing a memory position. 2. While the indicator light for the memory switch bein ...

    Operating tips
    ● The images from a device that is connected to the rear auxiliary input jacks cannot be viewed on the front displays. ● It is not possible to switch the source to USB (if so equipped) ...