Audible reminders

Audible reminders  - Warning/indicator lights and audible reminders - Instruments and controls - Infiniti G Owners Manual - Infiniti G

Key reminder chime

A chime will sound if the driver side door is opened while the ignition switch is pushed to the ACC position or pushed to the OFF or LOCK position with the Intelligent Key left in the Intelligent Key port. Make sure the ignition switch is pushed to the OFF position, and take the Intelligent Key with you when leaving the vehicle.

Light reminder chime

A chime will sound when the driver side door is opened with the light switch in the position and the ignition switch in the ACC, OFF or LOCK position. or Turn the light switch off when you leave the vehicle. position and the ignition switch in the ACC, OFF or LOCK position.

Turn the light switch off when you leave the vehicle.

Parking brake reminder chime

The parking brake reminder chime will sound if the vehicle is driven at more than 4 MPH (7 km/h) with the parking brake applied. Stop the vehicle and release the parking brake.

Brake pad wear warning

The disc brake pads have audible wear warnings. When a brake pad requires replacement, it will make a high pitched scraping sound when the vehicle is in motion. This scraping sound will first occur only when the brake pedal is depressed.

After more wear of the brake pad, the sound will always be heard even if the brake pedal is not depressed. Have the brakes checked as soon as possible if the warning sound is heard.

    See also:

    INFINITI Voice Recognition STANDARD mode
    The following section is applicable when the Standard Mode is activated. The Standard Mode enables you to complete the desired operation by simply following the prompts that appear on the display and ...

    Turn signal switch
    Turn signal 1 Move the lever up or down to signal the turning direction. When the turn is completed, the turn signals cancel automatically Lane change signal 2 To signal a lane change, move the l ...

    Power steering fluid
    Power steering fluid Check the fluid level in the reservoir. The fluid level should be checked using the HOT range (*1 : HOT MAX., 2 : HOT MIN.) at fluid temperatures of 122 to 1768F (50 to 808C) ...