See also:

Welcome light
To activate or deactivate the welcome light function, perform the following procedure. 1. Push the ignition switch to the ON position. 2. Open the driver’s side door. 3. Within 20 seconds ...

Replacing
Replace the wiper blades if they are worn. 1. Pull the wiper arm. 2. Push the release tab A , and then move the wiper blade down the wiper arm 1 while pushing the release tab to remove. 3. Inse ...

Antifreeze
In the winter when it is anticipated that the outside temperature will drop below 328F (08C), check antifreeze to assure proper winter protection. For additional information, see “Engine cooli ...