Console box
Automatic transmission models
Manual transmission models
Coupe — Manual transmission model
To open the console boxes, push the knob A and pull up the lid.
To close, push the lid down until latched.
The inner tray (if so equipped) can be moved to the front or rear position.
Removing the console lid (model with manual transmission)
To remove the console lid: 1. Remove the hinge mask A using a screwdriver wrapped with a cloth.
2. Loosen four screws, and remove the lid.
3. Tighten the two outside screws B .
4. Install the removed hinge mask A to the original position.
See also:
Active trace control (if so equipped)
This system senses driving based on the driver’s steering and acceleration/braking patterns, and controls brake pressure at individual wheels to help smooth vehicle response.
When the VDC OFF switc ...
Engine block heater (if so equipped)
Engine block heaters are used to assist in
cold temperature starting.
The engine block heater should be used
when the outside temperature is 208F
(−78C) or lower.
To use the engine bloc ...
Window washer fluid
Window washer fluid
WARNING
Antifreeze is poisonous and should be stored carefully in marked containers out of the reach of children.
Fill the window washer fluid reservoir periodically. Add wind ...