Locking with mechanical key
Locking with mechanical key
The power door lock system allows you to lock or unlock all doors simultaneously using the mechanical key.
• Turning the driver’s door key cylinder to the front of the vehicle 1 will lock all doors.
• Turning the driver’s door key cylinder once to the rear of the vehicle 2 will unlock the driver’s door. After returning the key to the neutral position 3 , turning it to the rear again within 60 seconds will unlock all doors.
• You can switch the lock system to the mode that allows you to open all the doors when the key is turned once.
(See “How to use SETTING button”.)
See also:
Trip computer
Switches for the trip computer are located
on the right side of the combination meter
panel. To operate the trip computer, push
the switches as shown above.
When the ignition switch is push ...
Pulling a stuck vehicle
If your vehicle is stuck in sand, snow, mud, etc., use a tow strap or other device designed specifically for vehicle recovery.
Always follow the manufacturer’s instructions for the recovery device.
...
Fuses
Two types of fuses are used. Type A is used in the fuse boxes in the engine compartment. Type B is used in the passenger compartment fuse box.
Type A fuses are provided as spare fuses. They are s ...