Linking Intelligent Key to a stored memory position
The Intelligent Key can be linked to a stored memory position with the following procedure.
1. Follow the steps for storing a memory position.
2. While the indicator light for the memory switch being set is illuminated for 5 seconds, push the
button on the Intelligent Key. If the indicator light blinks, the Intelligent Key is linked to that memory setting.
Push the ignition switch to the OFF position, and then push the
button on the Intelligent Key. The driver’s seat, steering wheel and outside mirrors will move to the memorized position.
See also:
Heated seats (if so equipped)
WARNING
Do not use or allow occupants to use the
seat heater if you or the occupants cannot
monitor elevated seat temperatures or have
an inability to feel pain in body parts that
contact t ...
Lane Departure Prevention (LDP) system
Precautions on LDP system
WARNING
► The LDP system will not steer the vehicle
or prevent loss of control. It is the
driver’s responsibility to stay alert, drive
safely, keep the vehicl ...
Checking engine coolant level
Checking engine coolant level
Check the coolant level in the reservoir when the engine is cold. If the coolant level is below MIN
2 , open the reservoir tank cap and add coolant up to the MAX 1 l ...