Troubleshooting guide

The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for the appropriate error.
Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved.

See also:
Tire and loading information label
The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. ...
Checking engine coolant level
Check the coolant level in the reservoir
when the engine is cold. If the coolant
level is below MIN 2 , open the reservoir
tank cap and add coolant up to the MAX1
level. If the reservoir tan ...
Activating Alternate Command Mode
When the Standard Mode is active, perform the following steps to switch to the Alternate Command Mode.
1. Push the SETTING button on the instrument panel.
2. Highlight the “Others” key.
3. Highli ...
