Safety—Seats, seat belts and supplemental restraint system
See also:
Procedure for storing the outsidemirror positions for best visibility whenbacking up
An outside mirror position for backing up can be stored for each memory switch (1 and 2):
1. Set the parking brake.
2. Place the ignition in the ON position. (Do not start the engine.)
3. Push ...
Forward-facing child restraint installation using LATCH
Refer to all Warnings and Cautions in the “Child Safety” and “Child Restraints” sections before installing a child restraint.
Follow these steps to install a forward-facing child restraint in the 2 ...
Vehicle set-up
1. Park the vehicle on a level surface and apply the parking brake.
2. Run the engine until it reaches operating temperature.
3. Turn the engine off and wait more than 15 minutes.
4. Raise and supp ...