Linking the keyfob to automatic drivepositioner memory

Linking the keyfob to automatic drivepositioner memory - How to use the remote keyless entry function - INFINITI Intelligent Key System - Pre-driving checks and adjustments - Infiniti JX Owners Manual - Infiniti JX

If the vehicle is equipped with automatic drive positioner, the keyfob can be linked to a memory setting.

See “Automatic drive positioner” in this section.

    See also:

    Break-in schedule
    CAUTION During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to foll ...

    Radar maintenance
    The two radar sensors for the BSW, BSI and BCI systems are located near the rear bumper. Always keep the area near the radar sensors clean. The radar sensors may be blocked by temporary ambient con ...

    Rocking a stuck vehicle
    If your vehicle is stuck in sand, snow, mud, etc., use the following procedure: 1. Turn off the Vehicle Dynamic Control (VDC) system. 2. Make sure the area in front and behind the vehicle is clear of ...