Snow mode
Used on snowy roads or slippery areas. When the SNOW mode is activated, engine output is controlled to avoid wheel spin. Turn the SNOW mode off for normal driving. Turn the drive mode select switch to the SNOW position. “SNOW” appears in the vehicle information display for 2 seconds.
See also:
Installing top tether strap
Sedan
Coupe
First, secure the child restraint with the LATCH lower anchors (rear outboard seat positions only) or the seat belt, as applicable.
1. Flip up the anchor cover from the anchor point ...
Intelligent All-Wheel Drive (AWD) (if so equipped)
If any malfunction occurs in the Intelligent AWD system while the engine is running, messages are displayed in the meter.
If the AWD error warning message is displayed, there may be a malfunction i ...
Vehicle Dynamic Control (VDC) off switch
The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions.
If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to redu ...