3rd row seats
The 3rd row power folding seat controls are located behind the 2nd row seat (both the driver’s and passenger’s side) on the 3rd row cup holder console
1 . There are also
controls located on the rear quarter trim
panel behind the 3rd row seats (passenger’s
side)
2 .
Before operating the 3rd row seats:
► Make sure the 2nd row seatback is not
reclined.
► Lower the 3rd row headrest to the full
down position.
► Disconnect and secure the center seat
belt and tongues into the retractor
base. See “3rd row center seat belt”
later in this section.
— Always reconnect the center seat
belt when the seat is returned to the
upright position
► Make sure that there are no objects on
the seatback cushion.
Power reclining
Push and hold the rear side of the switch 1 beside the 3rd row cup holders until the desired seatback angle (up to 20 degrees) is obtained. To move the seatback forward again, push and hold the front side of the switch 2 until the desired angle is obtained.
WARNING
► After adjustment, check to be sure the
seat is securely locked.
► Do not ride in a moving vehicle when the
seatback is reclined. This can be dangerous.
The shoulder belt will not be
against your body. In an accident, you
could be thrown into it and receive neck
or other serious injuries. You could also
slide under the lap belt and receive
serious internal injuries.
► For the most effective protection when
the vehicle is in motion, the seat should
be upright. Always sit well back in the
seat with both feet on the floor and
adjust the seat belt properly. See “Precautions
on seat belt usage” later in this
section.
Power folding
Push and hold the front side of the switch 1 located on the passenger side of the cargo room. The corresponding seatback (R: right side, L: left side) will be folded down automatically. Push and hold the rear side of the switch 2 . The seatback will be returned automatically. The seatback will rise up while holding the switch.
NOTE:
Operating the power folding seats can discharge the vehicle battery if the vehicle is not running.
CAUTION
When operating the rear power seatback
return, make sure that the vehicle is
stopped and the transmission is in the P
(Park) position.
WARNING
► Never allow anyone to ride in the cargo
area or on the rear seat when it is in the
fold-down position. Use of these areas
by passengers without proper restraints
could result in serious injury in an
accident or sudden stop.
► When returning the seatbacks to the
upright position, be certain they are
completely secured in the latched position. If they are not completely secured,
passengers may be injured in an accident
or sudden stop.
► Properly secure all cargo to help prevent
it from sliding or shifting. Do not place
cargo higher than the seatbacks. In a
sudden stop or collision, unsecured
cargo could cause personal injury.
See also:
Dual head restraint DVD system (if so equipped)
If your vehicle is equipped with the Dual Head Restraint DVD System, you can enjoy playing video files via a DVD, CD or USB memory that provides images and sound both from the front and rear display s ...
Wet brakes
When the vehicle is washed or driven through water, the brakes may get wet.
As a result, your braking distance will be longer and the vehicle may pull to one side during braking.
To dry brakes, driv ...
How to use brightness control and display ON/OFF button
HOW TO USE BRIGHTNESS CONTROL
AND DISPLAY ON/OFF BUTTON
Push the button to switch the
display brightness to the daytime mode or
the nighttime mode, and to adjust the
display brightness usin ...