Fog light switch


To turn the fog lights on, turn the headlight
switch to the
position, then turn
the
switch to the
position. To turn them
off, turn the switch to the OFF position.
The headlights must be on for the fog
lights to operate.
When the headlight switch is in the AUTO
position, turning the fog light switch to the
position will turn on the
headlights,
fog lights and the other lights while the
ignition switch is in the ON position or the
engine is running.
See also:
BSW system operation
If the radar sensors detect vehicles in the detection zone, the Blind spot warning indicator light located inside the outside mirrors illuminates. If the turn signal is then activated, the system ch ...
How to arm the vehicle securitysystem
1. Close all windows and the moonroof. The system can be armed even if the windows and moonroof are open.
2. Remove the Intelligent Key from the vehicle.
3. Close all doors, hood and liftgate. Lock ...
If your vehicle is stolen
If your vehicle is stolen, you should change the codes of any non-rolling code device that has been programmed into HomeLink . Consult the Owner’s Manual of each device or call the manufacturer or dea ...
