How to use brightness control and display ON/OFF button
HOW TO USE BRIGHTNESS CONTROL
AND DISPLAY ON/OFF BUTTON
Push the 
button to switch the
display brightness to the daytime mode or
the nighttime mode, and to adjust the
display brightness using the INFINITI controller
while the indicator is displayed at
the bottom of the screen.
Push and hold the 
button for
more than 2 seconds to turn the display
off. Push the button again to turn the
display on.
See also:
Door locks/unlocks precaution
● Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have diff ...
Engine block heater (if so equipped)
Engine block heaters are used to assist in
cold temperature starting.
The engine block heater should be used
when the outside temperature is 208F
(−78C) or lower.
To use the engine bloc ...
Lane Departure Prevention (LDP) system
Precautions on LDP system
WARNING
► The LDP system will not steer the vehicle
or prevent loss of control. It is the
driver’s responsibility to stay alert, drive
safely, keep the vehicl ...