Operating tips

Operating tips  - Dual head restraint DVD system (if so equipped) - Monitor, climate, audio, phone and voice recognition systems - Infiniti QX Owners Manual - Infiniti QX

► The images from a device that is connected to the rear auxiliary input jacks cannot be viewed on the front displays.
► It is not possible to switch the source to USB (if so equipped) or DVD using the remote controller when the rear display is in the AUX mode. Push the AUX (L)/ (R) button in the remote controller and turn off the AUX mode, and then push the preferred mode switch.
► It is not possible to display different video files, such as DVD or video files in the USB memory, on the front and rear displays at the same time.
► It is not possible to play an audio file and a video file in the same USB memory at the same time.

Multiple source display

It is possible to play different sources on each display. The following example shows how to operate multiple sources. 1. Display a video file in the front display by selecting the DVD mode. 2. Push the L side on the power ON·OFF button on the remote controller. The left rear display comes on and the DVD screen will be displayed. 3. Push the R side on the power ON·OFF button on the remote controller. The right rear display comes on and the DVD screen will be displayed. 4. Switch the source on the front display to an audio source. The sound from the speakers switches according to the front display. The rear display continues to display the DVD. 5. Turn on a pair of headphones and listen to the DVD on the rear displays using the headphones. 6. Connect an auxiliary device into the AUX jacks and push the AUX (L) or AUX (R) button on the remote controller. The selected side of the rear display turns to the AUX mode. The other rear display continues to display the DVD. 7. Turn on the other pair of headphones. If the sound from the headphones is not from the AUX jacks, switch the channel with the channel select switch on the headphones.

    See also:

    Reprogramming a single HomeLink button
    To reprogram a HomeLink Universal Transceiver button, complete the following. 1. Press and hold the desired HomeLink button. Do not release the button until step 4 has been completed. 2. When t ...

    Intelligent Key battery discharge
    If the battery of the Intelligent Key is discharged, or environmental conditions interfere with the Intelligent Key operation, start the engine according to the following procedure: 1. Mov ...

    Delete Phonebook
    The vehicle phonebook entries can be deleted all at the same time or one by one. ...