Window washer fluid

Window washer fluid  - Maintenance and do-it-yourself - Infiniti QX Owners Manual - Infiniti QX

WARNING

Antifreeze is poisonous and should be WARNING
Antifreeze is poisonous and should be stored carefully in marked containers out of the reach of children.

Fill the window washer fluid reservoir periodically. Add window washer fluid when the low window washer fluid warning illuminates. To fill the window washer fluid reservoir, lift the cap off the reservoir tank and pour the window washer fluid into the tank opening. Add a washer solvent to the washer for better cleaning. In the winter season, add a windshield washer antifreeze. Follow the manufacturer’s instructions for the mixture ratio. Refill the reservoir more frequently when driving conditions require an increased amount of window washer fluid. Recommended fluid is Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze or equivalent.

CAUTION
► Do not substitute engine anti-freeze coolant for window washer solution. This may result in damage to the paint.
► Do not fill the window washer reservoir tank with washer fluid concentrates at full strength. Some methyl alcohol based washer fluid concentrates may permanently stain the grille if spilled while filling the window washer reservoir tank.
► Pre-mix washer fluid concentrates with water to the manufacturer’s recommended levels before pouring the fluid into the window washer reservoir tank. Do not use the window washer reservoir tank to mix the washer fluid concentrate and water.

    See also:

    Pre-crash seat belts (front seats) (if so equipped)
    The pre-crash seat belt tightens the seat belt to help restrain front seat occupants under emergency braking. This can help reduce the risk of injury when a collision occurs. Pre-crash seat belt will ...

    Menu options
    The start menu can be displayed using the menu control switch on the steering-wheelmounted controls. 1. While the MAP or STATUS screen is displayed, push and hold the menu control switch u ...

    Confirming memory storage
    • Push the ignition switch to the ON position and push the SET switch. If the main memory has not been stored, the indicator light will come on for approximately 0.5 second. When the memory has stored ...