Speedometer and odometer
Speedometer
The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h).
Odometer/twin trip odometer
The odometer 1 and twin trip odometer 2 are displayed on the dot matrix crystal display when the ignition switch is in the ON position.
The odometer records the total distance the vehicle has been driven.
The twin trip odometer records the distance of individual trips.
Changing the display:
Pushing the TRIP A/B RESET switch 3 at the bottom left of the combination meter panel changes the display as follows:
Resetting the trip odometer:
Pushing the TRIP A/B RESET switch 3 for more than 1 second resets the trip odometer to zero.
Average fuel economy and distance to empty information is also available. (See “Dot matrix liquid crystal display” and “How to use STATUS button”.)
See also:
Power liftgate main switch
The power liftgate operation can be turned on or off by the power liftgate main switch on the instrument panel.
When the power liftgate main switch is pushed to the OFF position, the power operat ...
Confirming memory storage
• Push the ignition switch to the ON position and push the SET switch. If the main memory has not been stored, the indicator light will come on for approximately 0.5 second. When the memory has stored ...
Engine protection mode
The engine has an engine protection mode
to reduce the chance of damage if the
coolant temperature becomes too high (for
example, when climbing steep grades in
high temperature with heavy load ...