Hood
Hood
1. Pull the hood lock release handle 1 located below the instrument panel; the hood will then spring up slightly.
2. Pull the lever 2 up at the front of the hood with your fingertips and raise the hood.
3. When closing the hood, slowly close the hood down to latch both the right and left locks. Push the hood down to lock the hood securely into place.
WARNING
• Make sure the hood is completely closed and latched before driving. Failure to do so could cause the hood to fly open and result in an accident.
• If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood.
See also:
Precautions on FCW system
Vehicle ahead detection light
Warning systems switch
WARNING
● The FCW system is intended to warn you before a collision but will not avoid a collision. It is the driver’s responsibili ...
Vehicle set-up
1. Park the vehicle on a level surface and apply the parking brake.
2. Run the engine until it reaches operating temperature.
3. Turn the engine off and wait more than 15 minutes.
4. Raise and supp ...
Intelligent Brake Assist (IBA) system (if so equipped)
The Intelligent Brake Assist (IBA) system warns the driver by a warning light and chime when there is a risk of a collision with the vehicle ahead in the traveling lane and the driver must take avoida ...