Opening the fuel-filler door
To open the fuel-filler door, unlock the fuelfiller door by using one of the following operations, then push the right side of the door (Sedan) or push the left side of the door (Coupe).
• Push the door handle request switch with the Intelligent Key carried with you.
• Push the UNLOCK button on the Intelligent Key.
• Insert the mechanical key into the door lock cylinder and turn it to the rear of the vehicle.
• Push the power door lock switch to the UNLOCK position.
To lock, close the fuel-filler door securely and lock all doors by operating the door handle request switch, the LOCK button on the Intelligent Key, the mechanical key or the power door lock switch.
See also:
Engine protection mode
The engine has an engine protection mode
to reduce the chance of damage if the
coolant temperature becomes too high (for
example, when climbing steep grades in
high temperature with heavy load ...
Programming HomeLink® for Canadian customers
Prior to 1992, D.O.C. regulations required
hand-held transmitters to stop transmitting
after 2 seconds. To program your handheld
transmitter to HomeLink®, continue to
push and hold the HomeLin ...
Clearing the programmed information
Individual buttons cannot be cleared. However, to clear all programming:
Press and hold the two outer HomeLink buttons until the indicator light begins to flash in approximately 10 seconds. Release ...