Shift lock release

Shift lock release - Automatic transmission - Driving the vehicle - Starting and driving - Infiniti G Owners Manual - Infiniti G

Shift lock release
Shift lock release

If the battery charge is low or discharged, the selector lever may not be moved from the P (Park) position even with the brake pedal depressed and the selector lever button pushed.

To move the selector lever, perform the following procedure: 1. Push the ignition switch to the OFF or LOCK position.

2. Apply the parking brake.

3. Remove the shift lock cover A using a suitable tool.

4. Push down the shift lock B as illustrated.

5. Push the selector lever button C and move the selector lever to N (Neutral) position D while holding down the shift lock.

Now the vehicle may be moved to the desired location.

If the lever cannot be moved out of P (Park), have an INFINITI retailer check the automatic transmission system as soon as possible.

    See also:

    INFINITI Voice Recognition STANDARD mode
    The following section is applicable when the Standard Mode is activated. The Standard Mode enables you to complete the desired operation by simply following the prompts that appear on the display and ...

    INFINITI Intelligent Key
    Your vehicle can only be driven with the Intelligent Keys which are registered to your vehicle’s Intelligent Key system components and INFINITI Vehicle Immobilizer System components. As many as 4 Inte ...

    Clearing the programmed information
    Individual buttons cannot be cleared. However, to clear all programming, press and hold the two outside buttons and release when the indicator light begins to flash (approximately 20 seconds). ...