Selecting the vehicle-to-vehicle distance control mode

Selecting the vehicle-to-vehicle distance control mode - Intelligent Cruise Control (ICC) system (if so equipped) - Starting and driving - Infiniti G Owners Manual - Infiniti G

To choose the vehicle-to-vehicle distance control mode 1 , quickly push and release the MAIN switch A .

Once a control mode is activated, it cannot be changed to the other cruise control mode. To change the mode, push the MAIN switch once to turn the system off. Then push the MAIN switch again to turn the system back on and select the desired cruise control mode.

    See also:

    Off-road recovery
    If the right side or left side wheels may unintentionally leave the road surface. Maintain control of the vehicle by following the procedure below. Please note that this procedure is only a general g ...

    Uniform tire quality grading
    DOT (Department Of Transportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable ...

    Event Data Recorders (EDR)
    This vehicle is equipped with an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obs ...