How to handle the sensor

How to handle the sensor - Preview function (Intelligent Cruise Control system equipped models) - Brake assist - Starting and driving - Infiniti G Owners Manual - Infiniti G

The sensor for the Preview Function is common with Intelligent Cruise Control and is located below the front bumper.

To keep the Preview Function operating properly, be sure to observe the following: . Always keep the sensor clean. Wipe with a soft cloth carefully so as not to damage the sensor.

• Do not strike or damage the areas around the sensor. Do not touch or remove the screw located on the sensor. Doing so could cause failure or malfunction. If the sensor is damaged due to an accident, contact an INFINITI retailer.

• Do not attach a sticker (including transparent material) or install an accessory near the sensor. This could cause failure or malfunction.

    See also:

    Capacities and recommended fuel/lubricants
    The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the “8. Maintenance and do-it-yourself” section ...

    Infants
    Infants up to at least 1 year old should be placed in a rear-facing child restraint. INFINITI recommends that infants be placed in child restraints that comply with Federal Motor Vehicle Safet ...

    Brakes
    If the brakes do not operate properly, have the brakes checked by an INFINITI retailer. ...