Replacing

Replacing - Windshield wiper blades - Maintenance and do-it-yourself - Infiniti G Owners Manual - Infiniti G

Replace the wiper blades if they are worn.

Replace the wiper blades if they are worn.

1. Pull the wiper arm.

2. Push the release tab A , and then move the wiper blade down the wiper arm 1 while pushing the release tab to remove.

3. Insert the new wiper blade onto the wiper arm until a click sounds.

4. Rotate the wiper blade so the dimple is in the groove.

CAUTION
• After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened.
• Make sure the wiper blades contact the glass; otherwise the arm may be damaged from wind pressure.

Be careful not to clog the washer nozzle A . This may cause improper windshield washer operation. If the nozzle is clogged, remove any objects with a needle or small pin

Be careful not to clog the washer nozzle A . This may cause improper windshield washer operation. If the nozzle is clogged, remove any objects with a needle or small pin B . Be careful not to damage the nozzle.

    See also:

    LATCH lower anchor location
    LATCH label locations 2nd row bench The LATCH lower anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LATCH lower an ...

    Cargo floor box
    Push the handle to open the cargo floor board 1 . ...

    Trip computer
    Trip computer Switches for the trip computer are located on the right side of the combination meter panel. To operate the trip computer, push the side or front of the switches as shown above. Wh ...