Seat belt maintenance
● To clean the seat belt webbing, apply a mild soap solution or any solution recommended for cleaning upholstery or carpet.
Then wipe with a cloth and allow the seat belts to dry in the shade. Do not allow the seat belts to retract until they are completely dry.
● If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dry cloth.
● Periodically check to see that the seat belt and the metal components, such as buckles, tongues, retractors, flexible wires and anchors, work properly. If loose parts, deterioration, cuts or other damage on the webbing is found, the entire seat belt assembly should be replaced.
See also:
Automatic operation
Cooling and/or dehumidified heating (AUTO):
This mode may be used all year round. The system works automatically to control the inside temperature, air flow distribution and fan speed after the prefe ...
Control panel buttons — color screen without Navigation System (if so
equipped)
WARNING
● Positioning of the heating or air conditioning controls and display controls should not be done while driving in order that full attention may be given to the driving operation.
...
HomeLink universal transceiver (Type B) (if so equipped)
The Type B system can be identified by the IV 1 on the back of the mirror. Move the mirror to see if the IV is present. If the IV is on the mirror, use the procedure in this section to program the H ...