Installing top tether strap (3rd row bench seat)

Installing top tether strap (3rd row bench seat)  - Child restraints - SafetySeats, seat belts and supplemental restraint system - Infiniti JX Owners Manual - Infiniti JX

WARNING
In the 3rd row bench seat, a child restraint with a top tether strap can only be used on the passenger side seating position. Do not place in the drivers side seating position and attempt to angle the tether strap to the passenger side seating position.

The passenger side of the 3rd row bench seat is the seating position that can use a top tether strap.

First, secure the child restraint with the seat belt, as applicable.

1. Position the top tether strap 1 to the outboard side of the head restraint as shown.
2. Secure the tether strap to the tether anchor point 2 on the bottom of the seatback behind the child restraint.
3. Tighten the tether strap according to the manufacturers instructions to remove any slack. Make sure the head restraint does not contact the top tether strap.

If you have any questions when installing a top tether strap on the rear seat, consult your INFINITI retailer for details.

    See also:

    Changing a flat tire
    If you have a flat tire, follow the instructions below: Stopping the vehicle 1. Safely move the vehicle off the road and away from traffic. 2. Turn on the hazard warning flashers. 3. Park on a ...

    Infiniti Drive
    The M's throttle sensitivity and transmission mapping are fine tuned according to which of four driver-selectable modes is engaged via a switch positioned behind the gear lever: Standard, Eco, Spo ...

    Fog light switch
    To turn the fog lights on, turn the headlight switch to the position, then turn the fog light switch to the position. To turn the fog lights on with the headlight switch in the AUTOposition, t ...