Vehicle Dynamic Control (VDC) off switch

Vehicle Dynamic Control (VDC) off switch  - Instruments and controls - Infiniti JX Owners Manual - Infiniti JX

The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions.

The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions.

If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck vehicle, turn the VDC system off.

To turn off the VDC system, push the VDC OFF switch. The indicator will come on.

Push the VDC OFF switch again or restart the engine to turn on the system. See “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section.

    See also:

    Volume control switches
    Push the upper (+) or lower (−) side switch to increase or decrease the volume. ...

    Tire pressure
    Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare. When the low tire pre ...

    Lane departure warning (LDW) system
    Precautions on LDW system WARNING ● This system is only a warning device to inform the driver of a potential unintended lane departure. It will not steer the vehicle or prevent loss of contr ...