Clearing the programmed information
Individual buttons cannot be cleared. However, to clear all programming:
Press and hold the two outer HomeLink buttons until the indicator light begins to flash in approximately 10 seconds. Release both buttons. Do not hold for longer than 20 seconds. HomeLink is now in the train (or learning) mode and can be trained at any time beginning with “Programming HomeLink ” - Step 1.
See also:
Emergency engine shut off
To shut off the engine in an emergency situation while driving, perform the following procedure:
– Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 seconds, or
– ...
Automatic door locks
► All doors lock automatically when the
vehicle speed reaches 15 MPH (24
km/h).
► All doors unlock automatically when the
ignition switch is placed in the OFF
position.
The aut ...
Wheels and tires
If you have a flat tire, see “Flat tire”. ...