Selecting the memorized position
Set the shift selector to the P (Park) position, then:
● Within 45 seconds of opening the driver’s door, push the memory switch (1 or 2) or
● Place the ignition switch in the ON position and push the memory switch (1 or 2).
The driver’s seat, steering column, and outside mirrors will move to the memorized position with the indicator light blinking, and then the light will stay on for approximately 5 seconds.
See also:
Extending engine run time
time by performing the steps listed in “Remote starting the vehicle” in this section. Run time will be calculated as follows:
● The first 10 minute run time will start when the remote start f ...
Liftgate release lever
WARNING
● Always be sure the liftgate has been closed securely to prevent it from opening while driving.
● Do not drive with the liftgate open. This could allow dangerous exhaust gas ...
Vehicle load capacity
Do not exceed the load limit of your
vehicle shown as “The combined
weight of occupants and cargo” on
the Tire and Loading Information
label. Do not exceed the number of
occupants shown as ...