System operation
The automatic drive positioner system will not work or will stop operating under the following conditions:
● When the vehicle speed is above 4 MPH (7 km/h).
● When any of the memory switches are pushed while the automatic drive positioner is operating.
● When the adjusting switch for the driver’s seat and steering column is turned on while the automatic drive positioner is operating.
● When the seat has already been moved to the memorized position.
● When no seat position is stored in the memory switch.
● When the shift selector is moved from P (Park) to any other position.
● When the driver’s door remains open more than 45 seconds and the ignition switch is not in the ON position.
● The seat synchronization function is automatically disabled if the outside mirrors or steering wheel reaches its maximum adjustment.
● The seat synchronization function will not operate if the seat is adjusted over one of the following maximum thresholds:
– Seat sliding: 3.0 in (76 mm)
– Seatback reclining: 9.1 degrees
– Seat lifter (rear side): 0.8 in (20 mm) The entry/exit function can be adjusted or canceled through the Vehicle Settings in the vehicle information display by performing the following:
● Switch the Exit Seat Slide from ON to OFF.
● Switch the Exit Steering UP from ON to OFF.
See also:
In-cabin microfilter
Models without Advanced Climate Control
System:
The climate control system is equipped
with an in-cabin microfilter which collects
dirt, pollen, dust, etc. To make sure the air
conditioner he ...
Outside mirrors
WARNING
► Objects viewed in the outside mirror on
the passenger side are closer than they
appear. Be careful when moving to the
right. Using only this mirror could cause
an accident. ...
Wheels
Wash the wheels when washing the vehicle to maintain their appearance.
• Clean the inner side of the wheels when the wheel is changed or the underside of the vehicle is washed.
• Inspect wheel rims ...