Radar maintenance
The two radar sensors for the BSW, BSI and BCI systems are located near the rear bumper. Always keep the area near the radar sensors clean.
The radar sensors may be blocked by temporary ambient conditions such as splashing water, mist or fog.
The blocked condition may also be caused by objects such as ice, frost or dirt obstructing the radar sensors.
Check for and remove objects obstructing the area around the radar sensors.
Do not attach stickers (including transparent material), install accessories or apply additional paint near the radar sensors.
Do not strike or damage the area around the radar sensors. Consult an INFINITI retailer if the area around the radar sensors is damaged due to a collision.
Lane camera maintenance
For information of camera maintenance, see “Lane camera unit maintenance” in this section.
Sonar sensor maintenance
For information of sonar sensor maintenance, see “Sensor maintenance” in the this section.
Radio frequency statement
This device complies with part 15 of the FCC Rules and RSS-310 of Industry Canada.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Frequency of operation: 24.05GHz—24.25GHz
Field Strength: Not greater than 2.5V/m peak (0.25V/m average) at a distance of 3 m.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modification s could void the user’s authority to operate the equipment.
See also:
Supplemental air bag warning labels
1. SRS Air Bag Warning Labels
The warning labels are located on the surface of the sun visor.
Warning labels about the supplemental frontimpact air bag system are placed in the vehicle as shown in ...
Types of tires
WARNING
• When changing or replacing tires, be sure all four tires are of the same type (Example: Summer, All Season or Snow) and construction. An INFINITI retailer may be able to help you with infor ...
How to switch the display
The Around View Monitor display consists
of the left and the right screens. You can
see a combination of different views on the
screens as illustrated above.
Starting with the selector lever op ...