FCW system operation

FCW system operation  - Forward Collision Warning (FCW) system (if so equipped) - Starting and driving - Infiniti JX Owners Manual - Infiniti JX

The FCW system will function at speeds of approximately 10 MPH (15 km/h) and above, when the system turns on. Warning systems switch

The FCW system will function at speeds of approximately 10 MPH (15 km/h) and above, when the system turns on.

The FCW system has an automatic setting mode and a manual setting mode to turn the system on.

The setting mode can be changed. In the automatic setting mode, theFCWsystem is automatically turned on when the ignition switch is placed in the ON position. When the FCW system is on, the warning systems ON indicator light 1 on the warning systems switch illuminates. To cancel the FCW system, push the warning systems switch. The warning systems ON indicator light will turn off. To turn on the system, push the warning systems switch again.

When the warning systems switch is pushed, the LDW and BSW system will also turn on or off simultaneously. See “Lane Departure Warning (LDW) system/Lane Departure Prevention (LDP) system” and “Blind Spot Warning (BSW)/Blind Spot Intervention (BSI)/Back-up Collision Intervention (BCI) systems” in this section.

In the manual setting mode, you need to push the warning systems switch to turn on the system after the ignition switch is placed in the ON position.

The setting mode can be changed using the warning systems switch. To change the setting mode, push and hold the warning systems switch for more than 4 seconds when the warning systems ON indicator is off. When the mode is changed, a chime sounds and the lane departure warning light (orange) flashes.

For the sensor maintenance, see “Intelligent Cruise Control (ICC) system” in this section.

How to enable/disable the FCW system

Perform the following steps to enable or disable the FCW system.

1. Press the  “Settings” displays in the vehicle information display. Use the  to select “Driver button until “Settings” displays in the vehicle information display. Use the Assistance”. to select “Driver Assistance”.
Then press the ENTER button.

2. Select “Driver Aids”, and press the ENTER button.
3. To set the FCW system to on or off, use the ● Select “Forward” and press the ENTER button. buttons to navigate in the menu and use the ENTER button to select or change an item:

● Select “Forward” and press the ENTER button.

– To turn on the warning, use the ENTER button to check box for “Warning (FCW)”

    See also:

    Headlight control switch
    Lighting 1 When turning the switch to the position, the front parking, tail, license plate and instrument panel lights come on. 2 When turning the switch to the position, the headlights co ...

    How to park with predicted course lines
    1. Visually check that the parking space is safe before parking your vehicle. 2. The rear view of the vehicle is displayed on the screen A when the shift selector is moved to the R (Reverse) posi ...

    Towing recommended by INFINITI
    All-Wheel Drive (AWD) models INFINITI recommends that towing dollies be used when towing your vehicle or the vehicle be placed on a flat bed truck as illustrated. CAUTION Never tow AWD models w ...