Emission control information label
The emission control information label is attached to the underside of the hood as shown.
See also:
Activating Standard Mode
When the Alternate Command Mode is active, perform the following steps to switch to the Standard Mode.
1. Push the SETTING button on the instrument panel.
2. Select the “Others” key.
3. Select th ...
Programming HomeLink for Canadian customers and gate openers
Canadian radio-frequency laws require transmitter signals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink to pick up the signal during trainin ...
Locking doors
1. Move the shift selector to the P (Park) position, place the ignition switch in the LOCK position and make sure you carry the Intelligent Key with you.
2. Close all doors.
3. Push any door h ...