Seat belt maintenance
► To clean the seat belt webbing, apply a
mild soap solution or any solution
recommended for cleaning upholstery
or carpets. Then, wipe with a cloth and
allow the seat belts to dry in the shade.
Do not allow the seat belts to retract
until they are completely dry.
► If dirt builds up in the shoulder belt
guide of the seat belt anchors, the seat belts may retract slowly. Wipe the
shoulder belt guide with a clean, dry
cloth.
► Periodically check to see that the seat
belt and the metal components such as
buckles, tongues, retractors, flexible
wires and anchors work properly. If
loose parts, deterioration, cuts or other
damage on the webbing is found, the
entire seat belt assembly should be
replaced.
See also:
Avoiding collision and rollover
WARNING
Failure to operate this vehicle in a safe and
prudent manner may result in loss of control
or an accident.
Be alert and drive defensively at all times.
Obey all traffic regulations. ...
Sedan
Exterior rear
1. High-mounted stop light (Bulb replacement)2. Rear window defroster3. Rear combination light (Bulb replacement)4. Satellite antenna5. Fuel-filler door— Operation— Fuel recommendatio ...
Intelligent Key operating range
The Intelligent Key functions can only be
used when the Intelligent Key is within the
specified operating range from the request
switch 1 .
When the Intelligent Key battery is discharged
o ...