Installing top tether strap (2nd row captain’s seats or 2nd row bench seat)

2nd row bench seat
First, secure the child restraint with the LATCH lower anchors (2nd row captain’s or bench outboard seating positions only) or the seat belt, as applicable.
1. If necessary, raise or remove the head
restraint or headrest to position the top
tether strap over the top of the seatback.
If the head restraint or headrest
is removed, store it in a secure place.
Be sure to reinstall the head restraint or
headrest when the child restraint is
removed. See “Head restraints” earlier
in this section and “Headrest” earlier in
this section for head restraint or headrest
adjustment, removal and installation
information.
2. Secure the tether strap to the tether
anchor point on the back of each
seatback behind the child restraint.
3. Tighten the tether strap according to
the manufacturer’s instructions to remove
any slack. Make sure the head
restraint or headrest does not contact
the top tether strap.
If you have any questions when installing
a top tether strap on the rear seat, consult
your INFINITI retailer for details.
See also:
Rear
The 2nd row outboard seats are warmed by
built-in heaters. The switches located on
the back side of the center console can be
operated independently of each other.
1. Start the engine.
...
Self-test feature
The ABS includes electronic sensors, electric pumps, hydraulic solenoids and a computer. The computer has a built-in diagnostic feature that tests the system each time you start the engine and move th ...
Before starting
To get the best performance from INFINITI Voice Recognition, observe the following.
• Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (tra ...
