Installing top tether strap (3rd row bench seat)

Installing top tether strap (3rd row bench seat) - Child restraints - Safety — seats, seat belts and supplemental restraint system - Infiniti QX Owners Manual - Infiniti QX


3rd row bench seat

In the 3rd row bench seat, a child restraint WARNING
In the 3rd row bench seat, a child restraint with a top tether strap can only be used in the center position. Do not place in an outboard seating position and attempt to angle the tether strap to the center position.

The center position of the 3rd row bench seat is the seating position that can use a top tether strap. First, secure the child restraint with the seat belt, as applicable. 1. Position the top tether strap over the top of the center seating position seatback. 2. Secure the tether strap to the tether anchor point on the floor behind the child restraint. 3. Refer to the appropriate child restraint installation procedure steps in this section before tightening the tether strap. If you have any questions when installing a top tether strap, consult your INFINITI retailer for details.

    See also:

    If your vehicle is stolen
    If your vehicle is stolen, you should change the codes of any non-rolling code device that has been programmed into HomeLink®. Consult the Owner’s Manual of each device or call the manufacturer or ret ...

    Operating vehicle-to-vehicle distancecontrol mode
    To turn on the cruise control, quickly push and release the CRUISE ON/OFF switch A on. The cruise indicator light, set distance indicator and set vehicle speed indicator come on and in a standby ...

    Programming trouble-diagnosis
    If HomeLink® does not quickly learn the hand-held transmitter information: ► replace the hand-held transmitter batteries with new batteries. ► position the hand-held transmitter wi ...