Voltmeter

Voltmeter - Meters and gauges - Instruments and controls - Infiniti QX Owners Manual - Infiniti QX

When the ignition switch is pushed to the

When the ignition switch is pushed to the ON position, the volt meter indicates the battery voltage. When the engine is running, it indicates the generator voltage. While cranking the engine, the volt drop below the normal range. If the needle is not in the normal range (10.5 to 15.5 volt) while the engine is running, it may indicate that the charging system is not functioning properly. Have the system checked by an INFINITI retailer.

    See also:

    Selecting the memorized position
    Set the shift selector to the P (Park) position, then: ● Within 45 seconds of opening the driver’s door, push the memory switch (1 or 2) or ● Place the ignition switch in the ON posi ...

    Moisture
    Accumulation of sand, dirt and water on the vehicle body underside can accelerate corrosion. Wet floor coverings will not dry completely inside the vehicle, and should be removed for drying to avoid f ...

    Preview function (Intelligent Cruise Control system equipped models)
    When the Preview Function identifies the need to apply emergency braking by sensing a vehicle ahead in the same lane and the distance and relative speed from it, it applies the brake pre-press ...