Front
The front seats can be warmed by built-in
heaters. The switches located on the
instrument panel can be operated independently
of each other.
1. Start the engine.
2. Select heat range.
► For high heat, push the HI (High)
side of the switch 1 .
► For low heat, push the LO (Low) side
of the switch 2 .
► The indicator light3 will illuminate
when the heater is on.
3. To turn off the heater, push the “HI” or
“LO” side (whichever is selected) of the
switch. Make sure the indicator light
turns off.
See also:
Cup holders
CAUTION
• Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger.• Use only soft cups in the cup h ...
Rapid air pressure loss
Rapid air pressure loss or a “blow-out” can occur if the tire is punctured or is damaged due to hitting a curb or pothole. Rapid air pressure loss can also be caused by driving on under-inflated tires ...
Minimize voice feedback (for Alternate Command Mode)
To minimize the voice feedback from the system, perform the following steps.
1. Push the SETTING button on the instrument panel.
2. Select the “Others” key.
3. Select the “Voice Recognition” key.
...