Locking with mechanical key


The power door lock system allows you to
lock or unlock all doors simultaneously
using the mechanical key.
► Turning the driver’s door key cylinder to
the front of the vehicle 1 will lock all
doors.
► Turning the driver’s door key cylinder
once to the rear of the vehicle 2 will
unlock the driver’s door. After returning
the key to the neutral position 3 ,
turning it to the rear again within 5
seconds will unlock all doors.
► You can switch the lock system to the
mode that allows you to open all the
doors when the key is turned once.
(See “How to use SETTING button” in
the “4. Monitor, climate, audio, phone
and voice recognition systems” section.)
See also:
Engine block heater (if so equipped)
Engine block heaters are used to assist with cold temperature starting.
The engine block heater should be used when the outside temperature is 20°F (27°C) or lower.
WARNING
● Do not use y ...
Vehicle phonebook
This vehicle has two phonebooks available
for hands-free use. Depending on the
phone, the system may automatically
download the entire cell phone’s phonebook
into the “Handset Phonebook”. For ...
Automatic cancellation
A chime sounds under the following conditions and the control is automatically canceled.
• When the vehicle speed falls below approximately 20 MPH (32 km/h)• When the selector lever is not in the D ( ...
