Hood
1. Pull the hood lock release handle 1 located below the instrument panel; the hood will then spring up slightly. 2. Pull the lever 2 up at the front of the hood with your fingertips and raise the hood. 3. When closing the hood, slowly close the hood down and make sure it locks into place.
WARNING
► Make sure the hood is completely closed
and latched before driving. Failure to do
so could cause the hood to fly open and
result in an accident.
► If you see steam or smoke coming from
the engine compartment, to avoid injury
do not open the hood.
See also:
Tire and loading information label
Tire and loading information label
The cold tire pressure is shown on the Tire and Loading Information label affixed to the pillar as illustrated. ...
INFINITI Voice Recognition Standard Mode
The following section is applicable when
the Standard Mode is activated.
The Standard Mode enables you to complete
the desired operation by simply
following the prompts that appear on the
di ...
Jump starting
If jump starting is necessary, see “Jump starting”. If the engine does not start by jump starting, the battery may have to be replaced. Contact an INFINITI retailer. ...