Auto closure

If the lift gate is pulled down to a partly open position, the lift gate will pull itself to the closed position. Do not apply excessive force when the auto closure is operating. Excessive force applied may cause the mechanism to malfunction.
CAUTION
► The lift gate will automatically close
from a partly open position. To avoid
pinching, keep hands and fingers away
from lift gate opening.
► Do not let children operate the lift gate.
See also:
FCW system operation
Warning systems switch
The FCW system will function at speeds of approximately 10 MPH (15 km/h) and above, when the system turns on.
The FCW system has an automatic setting mode and a manual sett ...
Jacking up the vehicle and removing the damaged tire
WARNING
• Never get under the vehicle while it is supported only by the jack. If it is necessary to work under the vehicle, support it with safety stands.• Use only the jack provided with your vehicl ...
INFINITI Vehicle Immobilizer System keys
You can only drive your vehicle using the master or valet keys which are registered to the INFINITI Vehicle Immobilizer System components in your vehicle. These keys have a transponder chip in the key ...
