Inside mirror
Adjust the height and the angle of the inside mirror to the desired position.
Automatic anti-glare type
The inside mirror is designed so that it automatically changes reflection according to the intensity of the headlights of the following vehicle. The anti-glare system will be automatically turned on when the ignition switch is pushed to the ON position. When the anti-glare system is turned on, the indicator light A will illuminate and excessive glare from the headlights of the vehicle behind you will be reduced. Push the “” switch B to make the inside rearview mirror operate normally. The indicator light will turn off. Push the “I” switch C to turn the system on. Do not allow any object to cover the sensors D or apply glass cleaner on them. Doing so will reduce the sensitivity of the sensor, resulting in improper operation. For the HomeLink® Universal Transceiver operation, see “HomeLink® Universal Transceiver” in the “2. Instruments and controls” section.
See also:
To turn the system off
Push the OFF button. ...
Front seats
Front power seat adjustment
Operating tips:
• The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch.
• ...
Readiness for Inspection/Maintenance (I/M) test
A vehicle equipped with Four-Wheel Drive
(4WD) should never be tested using a two
wheel dynamometer (such as the dynamometers
used by some states for emissions
testing), or similar equipment. ...